OEM & ODMCostumesBy Shanghai Haitailu Clothing Co., Ltd7 min read

Private Label Halloween Costumes: A Complete Guide for Clothing Brands

Private label is a working arrangement, not a label sewn into a neckline. This guide sets out what a clothing brand controls, what the factory supplies, and where the decisions have to be made before bulk.

Private Label Halloween Costumes: A Complete Guide for Clothing Brands - Shanghai Haitailu buying guide

TL;DR

How clothing brands build private label Halloween costumes: the difference from white label and OEM, label and packaging requirements, custom design and sample approval, cooperation models, compliance documentation and what to prepare before briefing a factory.

Private label, OEM and white label are not the same thing

Private label is used loosely for anything a factory makes under someone else's name, which is why briefs arrive with the wrong expectations. In costume sourcing three arrangements are common, and they differ in who supplies the design and how much of the product the brand actually controls.

White label means a style already in the factory range, finished with the buyer's label and packaging. Private label starts from a similar garment, but the brand changes fabric, trim, colourway, size run, labels and packing so the item is not simply a re-labelled catalogue piece. OEM means the brand supplies the design and the factory builds to it. ODM means the factory develops the idea and the brand adapts the result.

The practical difference is where the decisions sit. If the design is fixed elsewhere, you are choosing from a range. If the design and its documentation are yours, you are building a product. Most private label programmes sit between those positions, so the brief should say which one you mean before sampling starts.

Related on this site: OEM vs ODM for Halloween costumes

What your brand actually owns in a private label programme

Ownership is decided in paperwork, not in conversation. Patterns, graded size sets, artwork files, print placements and photography all need an owner, and the answer is usually split: the brand owns its marks and artwork, the factory owns the blocks it has built over years, and the project owns the specific style developed between them.

Ask two questions early. Can the pattern files for your style be transferred if the relationship ends? Is the style exclusive to your brand, in which markets, and for how long? A factory that cannot answer either question clearly is not necessarily a bad partner, but you need the answer before you invest in packaging artwork.

Label artwork carries its own responsibility. A factory can reproduce a supplied logo accurately, but trademark clearance and the accuracy of the artwork belong to the brand. Send vector files, state the required colour reference and confirm which element must not be altered, so the first production label is not a design discussion.

Labels, hangtags and packaging that survive retail

A private label costume carries several labels, and each one has a different job. The main label identifies the brand, the care label carries fibre content and washing instructions for the destination market, and the size label has to survive washing and reading at a glance. Woven labels last longer and sit flatter than printed ones; printed labels are cheaper and accept finer detail.

Hangtags are a design item and a data carrier. Barcode, size, colour and any required market information must match the carton and the invoice, or a retailer will reject the delivery at goods-in. Packaging follows the same rule: polybag warning text, header card dimensions, hanger type and the assortment ratio in each carton are agreed before the line runs.

Placement is a measurement rather than an impression. The distance from the neckline to the main label, and from the side seam to the care label, should be written into the specification and checked on the pre-production sample. A label set two centimetres low is visible on a shelf and expensive to correct after packing.

Woven brand label stitched into the neckline of a costume
Main label position is specified as a measurement and checked on the pre-production sample.

Custom design: from brand direction to an approved sample

A usable brief contains more than a mood board. It states the customer, the retail price band, the selling season, the size range, the markets you ship to, the styles you want and the packaging format. Reference garments help more than drawings, because they show the construction and fit you already accept.

Sampling is a sequence rather than a single event. The first sample proves construction and proportion, a fitting round corrects the pattern, and the pre-production sample proves the style in bulk fabric with the labels and trim in place. Each round needs written comments against a revision log, otherwise the same correction is requested twice.

Cost conversations belong in this phase. Fabric, trim, print method and packaging all change the price, and a design approved without them is only a drawing. Brands that settle these details before the pre-production sample avoid the expensive version of the conversation, which happens after cutting.

Building a brand exclusive style inside a working factory

Most private label costumes are adaptations rather than inventions. A factory with an existing block for a dress, cape or jumpsuit can change fabric, colourway, trim, print and silhouette details faster than it can build a pattern from nothing, and the result can still be exclusive if the changes and the documentation are agreed as a set.

Size grading deserves its own decision. A size run built for one market does not automatically serve another, and a costume has proportion issues that a basic garment does not: cape length against body height, sleeve length against a glove, headpiece fit against a range of head sizes. State the target market and the fit model rather than assuming the factory default is correct.

Licensed characters are a separate subject. A brand exclusive costume cannot reproduce a protected character design without a licence for the territory and the channel, and a factory cannot grant that permission. Original themes, generic archetypes and licensed properties handled through the rights holder are the three workable routes.

Branded costume packaging and cartons prepared on a factory packing table
Packaging format, carton ratio and markings are fixed before the packing line starts.

Cooperation models and what each one asks of you

Three models cover most brand programmes, and the right one depends on how much design work you can carry and how much control you need over the finished garment. Whichever you choose, minimum quantities are confirmed per project rather than published as a general number, because fabric, print method, size split and packaging all change what a production run costs to set up.

  • Catalogue style with your label: fastest route, lowest development effort, limited exclusivity, suitable for testing demand
  • Adapted style: your fabric, colour and trim on an existing block, usually the balance point for a seasonal range
  • Full custom development: your design and tech pack, new patterns, longer sample cycle, strongest exclusivity position
  • Packaging only: branding applied to an existing product, useful for gift sets and retail promotions

Compliance, care labels and documentation

Fibre content must match what is in the garment, not what was ordered. If a fabric is substituted during production, the care label changes with it, which is one reason substitutions need written approval rather than a verbal note on the line.

Care instructions should be tested on the actual fabric, print and trim combination. A printed panel and a plain panel can behave differently in wash, and a costume that loses colour in the first wash creates a return that costs more than the test.

Children's costumes attract additional requirements: small parts, cords and straps, and flammability rules differ by market. A factory can supply material documentation and test reports from recognised laboratories where required, but the brand confirms which rules apply in the countries it sells into, because the obligation follows the seller.

Cost, timing and the constraints worth knowing

Cost is driven by fabric, trim count, print or embroidery setup, size split, packaging and order quantity, in roughly that order. Small runs carry a higher cost per unit because setup is spread across fewer pieces, and a wide size split with a short run leaves the factory balancing cutting efficiency against the assortment you asked for.

Timing follows the same logic. Fabric and trim lead times sit in front of everything, print development sits behind the sample approval, and packaging artwork has its own production time. A schedule that assumes these run in parallel, when they cannot, produces a delivery date that nobody can hold.

The most expensive change is the one made after cutting. Before cutting it is a design decision; afterwards it is a rework decision with a cost attached. Locking artwork, labels, packaging and the pre-production sample before the fabric is cut is the cheapest control available to a brand.

Quality inspector checking costume labels and stitching before packing
Label placement, stitching and trim security are checked before cartons are sealed.

What to prepare before you brief a private label factory

A brief that answers the following questions moves from enquiry to sampling without a second round of clarification, and gives the factory enough context to quote sensibly instead of guessing.

  • Product direction: styles, reference garments and the customer you are selling to
  • Markets and channels: destination countries, retail or online, and any label or test requirements
  • Size range and fit reference: the grading you use and the body sizes it must serve
  • Branding files: label artwork, hangtag layout, packaging dimensions and colour references
  • Volume expectation per style and per size, and the delivery window you are working to
  • Ownership terms: exclusivity expectations and whether pattern files must be transferable

Where a Chinese costume factory fits into this

Shanghai Haitailu Clothing Co., Ltd produces Halloween and party costumes, Christmas sweaters and onesies for brands that sell under their own label. The OEM and ODM services page explains how a brief becomes a sample, the manufacturer page describes the production base and the inspection routine, and the published costume series shows the styles already in production and available for adaptation.

For adjacent decisions, read how to develop a private label costume collection, OEM vs ODM for Halloween costumes and how to order Halloween costumes in bulk. Label formats, packaging artwork and target volumes can be discussed directly through the project brief.

Related on this site: OEM and ODM services · Costume manufacturer profile · Published costume series · Send your private label brief

Questions buyers ask

What is the difference between private label and white label Halloween costumes?
White label uses a style that already exists in the factory range with your label and packaging added. Private label changes the garment itself for your brand, which usually means fabric, trim, colourway, size run, labels and packing. The difference matters because private label needs design documentation and approval rounds, while white label is a purchasing decision.
Can we put our own label and packaging on an existing costume style?
Yes, and this is the most common starting point for a new brand programme. The factory applies your main label, care label, hangtag and polybag specification to an existing style. Exclusivity is usually limited in this model, so it suits demand testing rather than a long term brand position.
Who owns the design and the pattern in a private label project?
It depends on what each side brings. Brand marks, artwork and supplied designs belong to the brand, while pattern blocks and grading systems built by the factory normally remain with the factory unless the agreement says otherwise. Exclusivity, transfer of pattern files and the territory covered should be written into the agreement before development starts.
What should a brand prepare before requesting private label samples?
Prepare the product direction with reference garments, the markets you ship to, the size range and fit reference, branding artwork for labels and packaging, the expected volume per style, and the delivery window. A brief with these details usually reaches sampling without a clarification round, and the quotation is more meaningful because the factory is pricing a defined product.
Can a private label costume use our own size grading and fit?
Yes, if the grading is supplied as measurements rather than a size word. Costumes add proportion questions that basic garments do not, such as cape length against body height and headpiece fit across a range of head sizes. Supplying the measurement set and a fit reference lets the factory grade and sample to your standard instead of its default.

Wholesale inquiry

Ask the factory about your range

Leave your name and email and we will reply with the information you need for this guide. Item numbers, size splits or a reference style help us answer with something specific.

We reply by email. No newsletter is sent from this form.

Planning a costume order?

Send your requirements and we will confirm specification, quantity and timeline for your project. You can also review our OEM and ODM scope or browse the catalogue first.

Related reading

OEM & ODMCostumesNovember 10, 2026

How Are Halloween Costumes Manufactured in a Factory?

Costume manufacturing follows the same backbone as any garment program, with extra steps for trims, layered components and character detail. Understanding the sequence explains why sampling takes time and where quality decisions are made.

Sourcing guides for Halloween, party and fancy dress costume ranges.

Read article
OEM & ODMCostumesNovember 10, 2026

How to Develop a Private Label Costume Collection?

A private label collection is a small brand system, not a set of labels sewn into stock styles. Positioning, style architecture and packaging decisions all reach the factory as specification.

Sourcing guides for Halloween, party and fancy dress costume ranges.

Read article